For Jeep Compass 2007-2010 bumper kits, please click
For 1st Gen Jeep Compass bumper kits, 2011-2016/17, please click
Pictured at left is the Michael Weddick's Compass.... "Just wanted to say thank you once again for outfitting my 2018 Compass with your products. The lift, Bumper/winch combo and Safari rack is doing awesome with zero issues. I'll definitely be adding some of the rack accessories and a set of rock rails from you in the near future. I get asked constantly where I got the winch setup and always push them your way."
Trailhawk Winch Mount kit, Prerunner Skidplate kit, Smittybilt winch with synthetic line and Howse style fairlead (standard steel winch cable comes with roller fairleads), and the Rocky Road Low Profile AdventureRack up top.
Click picture for a larger view.
As the Jeep Compass gains popularity all around the world, more and more of these vehicles are hitting the trails.
Some people don't think you can take these Jeeps offroad and have some fun, but Compass owners know better! After all... ITS A JEEP!
And being that it is a true Jeep, Compass owners are starting to get the itch to improve, build up, and equip their vehicles for the trail. Rocky Road is the first and only company to introduce lift kits, skidplate, rack systems for the Jeep Compass, and once again we're the first to provide a true winch mounting system and bumper kit as well.
When you're checking out the photos of our awesome looking system. These kits will work for any model Jeep which has the front tow hook system. So far we have identified the Trailhawk and Upland packages. If you have compatibility questions on your Jeep, please email us!
Your factory plastic bumper shell is currently mounted to a steel frame, which then attaches to the actual frame of your Jeep. Our kit completely replaces that steel bumper frame and provides a new heavy duty steel frame which also includes the new winch mounting provisions. The Rocky Road winch mounting kit comes with the necessary mounting/hardware in addition to the *factory hardware when your stock steel bumper frame is removed and replaced.
Compass Trailhawk Brush Bar kit.
Equipped with light mounting tabs for standard offroad lights, or LED light bars.
Click pictures for larger view.
In additional to our Winch bumper system, we also have a more simple Brush Bar kit available as pictured to the right.
These kits allow for round or square offroad lights and fog lights. The bar kit also has tabs which will allow for LED light bars to be mounted.
The kits provide additional protection up front as any Brush Bar kit will do. They also really dress up the bland look of the front end of your Compass for a more rugged and Offroad look.
The Rocky Road winch mount kit is a full bolton system.
No need to do metal-work, fabrication, or welding to your Jeep.... Though of course as you can see from the photos.
While this kit is designed to be do-able by experienced at home do-it-yourselfers, having a body shop or mechanic perform the installation may be helpful for some.
The kit includes a detailed instruction manual with lots of pictures to help make the installation run as smoothly as possible.
Please note: If you are installing a winch (our bumper kits require the winch mount whether you install a winch or not), our kits have only been test fitted for the Warn and Smittybilt winches listed below.
Other winches may fit, but we can only guarantee the fit of winches sold by Rocky Road for your Compass.
QUALITY: The other most obvious feature that sets Rocky Road equipment apart is the quality. Quality of material, quality of manufacture, quality of finish. Our commitment to quality is visible in every accessory we manufacture.
FINISH: To ensure your investment is properly protected, all Rocky Road kits are treated with a chemical wash, high temperature powdercoat application, and a sealing system.
Photo at left shows winch bumper system with Prernner skidplate, and winch with synthetic winch cable.
Click picture for larger view.
The most well-liked setup for any of our Jeep bumpers is always our COMBO KIT !
This is the winch mount bumper AND the lower Prerunner skidplate shown in the photo at left.
Not only is it functional as a great brace and impact plate, this awesome Bumper system on the front of your Jeep will give it a VERY tough offroad look. It really transforms the look of your Jeep from standard SUV, to that of a trail-ready offroad MACHINE... whether you plan to take it offroad or not. This is the kit you should choose if you want the bumper AND plan to install a winch.
Our Winch Bumper kit and Brush Bar kit come with light mounting already included.
We do carry round (photos above) and square light kits. These can be found in our order section below in with Optional components.
LED light bars may also be used.
COMING SOON FOR YOUR JEEP... Rack systems. Low Profile Stealth style safari racks for light or heavy use, Roof top Tent, whatever your needs may be!
If you have a 2007-2010 model Compass, please visit our other webpage by clicking
If you have a 1st Gen Compass (2011-16/17 and newer), please click
Check out Rock Slider (skidplate style) kits for your all Jeep Compass, please click
|Jeep Compass Bumper kits||Select kit||Click to add to cart|
Side photo of our Brush Bar kit with no lights mounted.
You can install our more standard offroad lights, or an LED light bar!
Click the picture for larger view