|
Orders: 888 801-7271 |
|
|
 |
|
Orders: 888 801-7271 |
|
|
|
 |
 |
 |
 |
 |
 |
 |
|
NOTE: Our engineered mounting system simply cannot be bent or damaged. We pick up these trucks with forklifts with our rock sliders. The kits are mounting to heavily reinforced structural panels on the vehicle, and the mount system is stronger than any simple frame mount setup on the market. It is a more complex and well engineered mounting system than a simple frame mount and our lifetime guarantee backs that fact up!
Rocky Road F250 Super Duty & F350 Rock Slider kits tuck up tight! See photos at left to show this and how our vehicle clearance is superior to ALL others on the market. The factory kits have these cheesy low hanging brackets. Why? Our rock slider kits as good or better clearance than any other kit on the market as shown in the 2nd photo at left, the frame sits down lower than our rock sliders!
All photos at left display our 'Full Cover Kicker Rock Sliders'.
These kits have the special Kick-out section in the rear, which make an excellent step as shown in our photo.
They stand off a few inches from the truck to protect not only offroad, but also in parking lots with errant doors!
Click for larger views.
Our Heavy Duty Rock Slider kits are NOT the light duty 'show' bars... which are sold by every other 4x4 shop. We use thick inner hitch steel to make sure your bars do NOT bend! Most other "rocker slider" kits are made from 1/8" wall or thinner material.... truly flimsy (see picture at bottom).
Don't group our kits in with those flimsy tube 'show' bars, as those will bend on a hard impact.
Our Rock Sliders have a very sleek rounded look about them as we use genuine inner hitch steel in their construction.
Hitch steel is not only very strong, it also has a nice radius corner instead of a hard boxy look.
Inner hitch steel is the stuff you use to plug into 2" receiver hitches.
Its 'sheer' weight is astronomical as is its bending strength. Our shop press goes to 100 tons and we can't even start to bend them.
Do you think a scrawny little rock can hurt these things? Think again!
Why hitch steel? Why not go with a lesser gauge steel to save production costs?
Because we wouldn't trust anything less to protect our vehicles and neither should you!
 |
 |
 |
 |
|
Rocky Road Rock Sliders
|
Rocky Road Superslider
|
RRO Kicker Rock Sliders
|
RRO Full Cover Kicker Sliders
|
Our rock sliders are very simple to install and are 'bolt on' with no welding or metal/plastic cutting at all.
These kits are 100% bolton and can be installed by anyone.
Instructions outline the simple bolton process for installation. Save money doing it yourself and you'll be shocked at the short installation time!
In a nutshell, Rocky Road F250 / F350 Rock Sliders are the strongest and thickest bars on the market, best mounting system, numerous superior engineering points.
Why wouldn't you get a set???
We have been asked about the mounting strength of the bolts used in our mounting system...
The bolton system is stronger than most people think.
Each bolt has a breaking strength of 318kgf !!
KGF is equal to the amount of force required to accelerate 1kg at a rate of 1 meter per second. Put another way, each bolt requires one or more impacts of 700lbs to break it. The truck is using 9 mounting bolts per side to attach the rock slider which comes to a total impact load of 6,296lbs to break all of the mounting bolts. The ENTIRE weight of your truck on average is 6,000lbs.
So yes... our kits can hold one side of the truck if it comes down on a rock or stump.
If you have any questions or concerns at all about our incredibly strong mouting system and would like a discussion on this, please email us. There are some incorrect beliefs out there from well-meaning, but ill-informed Ford owners about the strength of various mounting systems, and we are very happy to discuss this from an engineering standpoint.
PLEASE NOTE: Semi-Truck freight deliveries have changed and are no longer delivering to residential. These kits are too
large for FedEx/UPS and must ship to a commercial address, or a freight hub nearest your location for pickup, which we will arrange.
| Best Ford F250 / F350 Rock Sliders - Step bars | Select kit | Click to add to cart |
Rocky Road is looking for Ford trucks to build rock sliders for... all years, all models.
If you do not see a listing for your truck and are in our area, please contact us!
As we are looking for a truck we can have in our shop for a couple days for the design, you will get a set of rock sliders, INSTALLED, for $500 at our facility in northern Utah. This allows us to do the design work for these trucks, and you get a killer deal from the leader in bombproof rock sliders, installed on your truck!!
Email us at the email button above for more information and to set an appointment.
This offer only lasts until we have a truck of a certain model range covered, then this amazing offer disappears for that truck and they go on sale to the public at regular pricing
888-801-7271
This photo shows a comparison between our kit (on the right), and our competitors' "rock slider" kits (on the left).
You can see they're using soup-can metal for their step slider systems. This should in NO WAY be considered a true
rock slider. The factory steps are the same weak material. Basically every other kit on the market calling itself a
"rock slider" is using the same tin can metal... except for Rocky Road.
This is why our kits are indestructible!
Click for larger view
