Some of the cool new stuff we will be working on over the next few months....

2.0 Suzuki swap kits??? 130 Suzuki genuine horsepower. Is it coming? You bet! And forget the other guy's kits that cost over $1300 for this swap. Are they nuts? Not just highway robbers. Keep an eye out for our kit and save yourself enogh to drop in a locker.... or two!

1.6 16valve fuel injection harness kits. Once again, the other guys shaft you for $400 for this setup. What a rip-off! AND they require you to send them two complete factory harnesses afterwards. Forget that. We'll send you a new harness and you don't have to spend a full day pulling the factory harness from the 16v donor vehicle. Lower price and save yourself the headache the other guys demand..... Can you feel the love? We got it!

Possible External Bars ala Land Rover D90! These go from your cowl area up along (and connecting across the top of) the windshield frame and back along the top of the door, mounting to a bracket added to the main hoop. Stay tuned for pictures and pricing!

Air compressor kit will utilize the Suzuki air conditioning compressor.  The kit will convert the air conditioning compressor to a fully functioning air compressor, along with some neat additions.  The kit will include the following items: 2: Aluminum Manifolds for inlet and outlet of air conditioning compressor 1: Wilkerson Lubricator (L00-01).  This will lubricate the air going into the air conditioning compressor.  Without this unit, the air conditioning compressor will run dry and eventually burn out.
1: Coalescing Filter (M00-02).  This will capture the oil in the air leaving
the air conditioning compressor. 1: Brass Air Filter. Used for air intake
1: Pressure Switch. This will automatically turn the compressor on if the
tank pressure drops below 100 psi and turn off when the pressure exceeds
120 psi.1: Pressure Override Switch. This will override the pressure switch if you want to turn the compressor off. 6: NPT fittings (all that is needed) for connection of hose line to and from filters, lubricator, and manifolds.
1: Detailed instructions on the installation of components.

Ubolt skids. These are no ordinary skids though. For you guys who have your springs still under your axles, our skids will dramatically increase your clearance, while protecting your ubolts from trail damage. From now on, when you look under your springs....all you'll see is a 1/4" plate. Our skid plates elevate the ubolt assembly above the bottom of your springs out of harm's way, and for maximum clearance.

Tube Doors. Our tube doors will allow you the open air and visibility of running without doors, but save you from eating the mud and debris thrown up by your aggressive off road tires. Cool looking and very affordable.

Quick release mudflaps. Run these mudflaps whenever you want and then pull a pin to get them to remove the mudflaps in about 3 seconds. It'll help keep the cops at bay and give you the utmost in flexibility. You choose!

 

....Better start saving up! :^)