ARCA/UROC Competitor, Bart Jacobs, uses and abuses our Rockrails
The only rocker bar capable of withstanding this type of world class abuse!

Rocky Road Rockrails are the creme' de la creme' of the Jeep rocker protection phenomenom. We use 1/4" inner hitch steel to make sure your bars do NOT bend! Anything else is just plain flimsy. Most other rocker bars are made from thin 1/8" wall material and a good number of the Rockrails we sell are to those who have bought these thinner bars and have bent them up. Even slick looking dual tube designs that appear to offer better protection are still only made from 1/8" steel and will bend on a hard impact. As pretty as those dual tube jobbers may look, when push comes to shove, and rocks come to crunch, those dual tubers will bend.... and many times, they'll shove themselves up into the body causing vehicle damage when they do collapse. We know, we've replaced many of them for customers as well. At 1/4" thick, ours are the absolute strongest rocker protection you can buy in the universe.

An integrated mounting system. By far, the best on the market! Well used Rockrails mounted on Bart Jacob's XJ.

Bart's is one of only 2 Cherokees to ever compete in the ARCA/UROC Rockcrawling Championships!

They BOTH trust only Rocky Road Rockrails to protect their Cherokees!

The Rockrails have a very sleek rounded look about them as we use genuine inner hitch steel in their construction. Hitch steel is not only very strong, it also has a nice radius corner instead of a hard boxy look. Inner hitch steel is the stuff you use to plug into 2" receiver hitches. Its sheer weight is astronomical as is its bending strength. Our shop press only goes to 40 tons and we can't even start to bend them. Do you think a scrawny little rock can hurt these things? Think again!

Rockrails in action on Randy Harris' XJ (editor for 'Cherokee America').

Randy wouldn't trust any other rocker to his Jeep, why should you???

Why hitch steel? Why not go with a lesser gauge steel to save production costs? Because we wouldn't trust anything less to protect our Jeep and neither should you! Besides, since these carry the Rocky Road **lifetime guarantee**, we don't want to have to replace them for you for free every couple years or so. We made them indestructible so they'll last forever and they are guaranteed forever, NEVER to bend on you!

Our rockrails are very simple to install and are completely 'bolt on'. They mount on the sub-frame as well as along the body seam. Not mounting along the entire seam causes extreme stress with the leverage of an impact on the outer rocker itself. Our design distributes the load across a broad area instead of focusing it on small spots. Installation is made easier by marking strips which we include with every set. Instead of trying to juggle a 35lb rocker bar in place while you mark your holes, you simply clamp our thin steel marker strip onto the body seam and mark your mounting holes.

The 4Wheel & Offroad Magazine Skyjacker Rock Ready Project Cherokee.

They can chose any rocker protection out there... they hunted us down and chose ours!
Even folks in the industry recognize Rocky Road Rockrails as the best protection on the market.

You'll find our Rockrails very attractive and will blend in nicely with your stock flares and moldings. They run fender to fender and many folks have commented on their very OEM (factory) look. They tuck tighter to the body than any other rocker on the market as well. In a nutshell, Rockrails are the strongest and thickest bars on the market, best mounting system, and are guaranteed NEVER to bend. Why wouldn't you get a set?

Don't take only our word for it though. Check out the Rockrail review at the Cherokee America website for pics on the install and overall impressions on their looks and durability. Then come on back and order yourself some!

Available for the Comanche as well. Same indestrucible design as our Cherokee bars. Same easy mounting. These Rockrails are designed with a longer slider bar and shaped specific to your frame and truck bar layout. Specifically built for your shortbox Comanche. View a shot of our project Comanche to the right and be sure and check out our 5" and 6" Comanche lifts now available on our suspension page.

Take a look at our Comanche Rockrails. Click for larger view.

Super sliders shot on our company Cherokee. Click for larger image.

Another Supersliders shot. Also check out the snorkel installation w/the fender flares on a 1997 XJ. Click pic for larger view.

Now also available are the Rocky Road Super-sliders.

These rocker bars offer all the strength and warranty of our regular Rockrails, but with the added bonus of an additional upper tube. This upper tube can provide even more protection against sliding into rocks, trees, or other trail hazards.

Everyone who has seen these on our shop 4x4s has wanted a pair. They are unequaled in strength and looks.

They also make an excellent step for access to roof racks and such. The Super-sliders are replacing the Steprails that were available.

Each Super Slider kit mounts identical to the standard Rockrail for the vehicle. It also still features that great looking 45* front and rear edge. Not only good for looks, but alot more practical for trail use than our competition's squared off ends.

This is basically the same proven design as our world famous Rockrails, only with the extra slider tube up top.

	Live chat by LivePerson