QuickAir 1

Available in two configurations.....

A hard mount unit (compressor only) is ideal for mounting underhood or inside your vehicle. Ultra-compact size requires minimal space, and oil-less design permits mounting in any position. Can be used with or without an air tank.

Or as a ready-to-use version (pictured to the left) of the hard mount compressor. Complete with a convenient ABS carrying case, air hose with clip-on air chuck and cigarette lighter adapter, it can be moved from one vehicle to another. Low amp draw allows use of your cigarette lighter for power.

1.13 CFM @ 6 amps, Dimensions: 7.25" x 3" x 4.25"Weight: 5 lbs.

QuickAIR2

Available in two configurations.....

A hard mount unit (compressor only) is ideal for mounting under the hood or inside your vehicle. Compact size and a portable mounting bracket allows the compressor to be mounted in the vertical or horizontal position. Can be used with or without an air tank. Includes #8 AWG X 2ft. ground wire and #8 AWG X 10ft. positive wire.

Also available as a portable unit (pictured to the left) and complete ready-to-use version of the hard mount compressor. The steel case houses the compressor, 25ft. nylon coil hose with clip-on air chuck, and jumper cable style battery connectors. Hook it up to the battery and you're ready to go. Power Cord Length: 10 ft. -  Air Hose Length: 25 ft.

2.18 CFM @ 22 amps

QuickAIR3

Available in two configurations.....

Same as the other units, it is available as the stand-alone pump, or as the portable setup with carrying case as pictured to the left.

The ultimate 12-volt tire-filling machine! This twin-piston unit produces a whopping 3.65 CFM for super-fast tire-filling, and is loaded with features that ensure years of reliable service. This high volume low-pressure compressor was designed for rapid tire inflation of large sized tires. This is the ideal compressor if you are running 33" and larger tires.

PERFORMANCE & CURRENT CONSUMPTION
1/3 Horsepower permanent magnet motor
Flow Rate: 3.65 CFM
Maximum Pressure: 70 psi
Max Duty: 40 minutes @ 40 psi
Teflon Piston Rings
Oil-less operation requires no lubrication
Washable sponge intake filters
50 amp in-line fuse
Built in Thermal cut-out
Fan cooled
Capable of re-seating tires on rim with or without tank

Bolt-in Air Tank.

150 psi rated tank is ideal for air locker setups or running small air tools. Measuring 6" x 24", this tank can be easily mounted alongside or between frame rails. Five 1/4" NPT openings allow mounting in any position. 

	Live chat by LivePerson