Rocky Road Rockrails are the creme' de la creme' of the Jeep rocker protection phenomenon. We use 1/4" inner hitch steel to make sure your bars do NOT bend! Anything else is just plain flimsy. Most other rocker bars are made from thin 1/8" wall material and a good number of the Rockrails we sell are to those who have bought these thinner bars and have bent them up. At 3/16" thick, ours are the absolute strongest rocker protection you can buy in the universe.

An integrated mounting system. By far, the best on the market! Rockrails ready to be mounted on Mike Craven's Liberty. Notice the marking strip for super easy marking of drilling points. 

The Rockrails have a very sleek rounded look about them as we use genuine inner hitch steel in their construction. Hitch steel is not only very strong, it also has a nice radius corner instead of a hard boxy look. Inner hitch steel is the stuff you use to plug into 2" receiver hitches. Its sheer weight is astronomical as is its bending strength. Our shop press only goes to 40 tons and we can't even start to bend them. Do you think a scrawny little rock can hurt these things? Think again!  

Why hitch steel? Why not go with a lesser gauge steel to save production costs? Because we wouldn't trust anything less to protect our Jeep and neither should you! Besides, since these carry the Rocky Road **lifetime guarantee**, we don't want to have to replace them for you for free every couple years or so. We made them indestructible so they'll last forever and they are guaranteed forever, NEVER to bend on you!

Rocky Road kits tuck tight and high for maximum clearance. Our Supersliders provide an additional outer slider tube as pictured. Great for extra side protection on or offroad.

Picture is of a 2008 KK Liberty Superslider kit. Click for larger view. 

Our rockrails are very simple to install and are completely 'bolt on'. They mount on the sub-frame as well as along the body seam. Not mounting along the entire seam causes extreme stress with the leverage of an impact on the outer rocker itself. Our design distributes the load across a broad area instead of focusing it on small spots. Installation is made easier by marking strips which we include with every set. Instead of trying to juggle a 35lb rocker bar in place while you mark your holes, you simply clamp our thin steel marker strip onto the body seam and mark your mounting holes.

You'll find our Rockrails very attractive and will blend in nicely with your stock flares and moldings. They run fender to fender and many folks have commented on their very OEM (factory) look. They tuck tighter to the body than any other rocker on the market as well. In a nutshell, Rockrails are the strongest and thickest bars on the market, best mounting system, and are guaranteed NEVER to bend. Why wouldn't you get a set?

Rockrails available for 05+ model Libertys. Please make sure to note your year of Rockrail during purchase is it is a different product. Older model Rockrails will not fit properly.  

 

Superslider shot on an 02 Jeep Liberty. Click for larger image.

Now also available are the Rocky Road Supersliders. These rocker bars offer all the strength and warranty of our regular Rockrails, but with the added bonus of an additional upper tube. This upper tube can provide even more protection against sliding into rocks, trees, or other trail hazards.

Everyone who has seen these on our shop 4x4s has wanted a pair. They are unequaled in strength and looks.

They also make an excellent step for access to roof racks and such. The Supersliders are replacing the Steprails that were once available.

Each Super Slider kit mounts identical to the standard Rockrail for the vehicle. It also still features that great looking 45* front and rear edge. Not only good for looks, but alot more practical for trail use than our competition's squared off ends.

This is basically the same proven design as our world famous Rockrails, only with the extra slider tube up top.

  

	Live chat by LivePerson