Adjustable Track bars for Jeep Grand Cherokee

 

 

Shot of rear ZJ drop bracket.

Multiple mount positions for lifts from 3-5" of lift.

Very strong 3-point mount system. No drilling.

Click on pic for larger view.

 

 


Picture of front ZJ (thru 1998) track bar.
Pic doesn't show, but bars are powdercoated black.


Shot of front WJ Track bar. Notice our offset bushing mount which provides max clearance.

Click on pic for larger view. 

Picture of the rear WJ Ylink spacer kit.

Easy bolton for correct pinion alignment on 3-4.5" lifts.

Click on picture for larger view. 


Picture of the rear WK (2005+) trackbar. Click on picture for larger view.
The factory Track bars locate the body in relation to the axle.

Track bars mount at the framerails and run down to the axles.

Why are new track bars necessary?
When lifted, the distance between the axle and the vehicle is increased which cases the track bars that locate the axles to start pulling the axle sideways. This is definitely noticeable with lifts over 2.5" on any coil spring Jeep.

 

ZJ, all models thru 1998...
For the ZJ Grand Cherokee, our Adjustable track bar kit for the ZJ Grand Cherokee front eliminates these problems by mounting in the original location and having an adjustable tie rod end to accommodate anything from 3 to 7" of lift. The adjustable tie rod end of the front can also be replaced eventually if needed.

For the ZJ rear axle, our drop bracket works awesome. Bolts into place easily and has different mount positions for lifts from 3-5". Very simple to install and very inexpensive.

Also available for the ZJ Grand Cherokee are our front & rear control arms. We designed these with the necessary offset to avoid rubbing on the tires when they are turned. Helps tire fitting for larger 32-33" tires and helps with factory spec alignment on hard-to-please Jeeps. Fixed length, adjustable length, and with Johnny Joints. For info on these, please click

 

WJ, 1999-2004...
For the WJ Grand Cherokee, we have a new adjustable front track bar. Allows you to perfectly align your axle with lifts from 2-6" tall. Our offset bushing setup provides ample clearance for high articulation Jeeps and allows room for lifts to about 6" tall.

The rear of the WJ uses a different 3-link style system. For proper axle alignment and pinion angles in the rear, we use a spacer block which bolts in-between the factory upper Y-link, and the axle itself. Very simple to install and good for lifts in the 3-5" range.

Also available for the WJ Grand Cherokee are our lower front control arms. We designed these with the necessary offset to avoid rubbing on the tires when they are turned. Without these arms (included in our WJ Trailblazer suspension), you will not be able to achieve proper front end alignment on lifts over 3". Control arms are good for lifts from 3-5", fixed length and adjustable with Johnny Joints. For info on these, please click

 

WK, 2005 and newer...
Our Rear track bar for the WK Grand Cherokee (2005 and newer) gives you fine tune adjustability for your rear axle on lift at or over 2.5".

 

All Rocky Road Track Bar and relocation kits are powdercoated black. Track bar kits come with poly bushings, dust covers, and/or greaseable tie rod ends (front), and hardware. Relocation kits come with necessary hardware.

 

 

 

 

Grand Cherokee kits

 

 

 

 

 

 

 

  Live chat by LivePerson

 

 

 888-801-7271